Cisco Systems VPN 3002 Home Safety Product User Manual


 
12-8
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 12 Administration
Administration | Ping
Address/Hostname to Ping
Enter the IP address or hostname of the system you want to test. (If you configured a DNS server, you
can enter a hostname; otherwise, enter an IP address.) Maximum is 64 characters.
Ping/Cancel
To send the ping message, click Ping. The Manager pauses during the test, which might take a few
moments; please wait for the operation to finish. The Manager then displays either a Success or Error
screen; see below.
To cancel your entry on this screen, click Cancel. The Manager returns to the main Administration
screen.
Success (Ping)
If the system is reachable, the Manager displays a Success screen with the name of the tested host.
Figure 12-8 Administration | Ping | Success Screen
Continue
To return to the Administration | Ping screen, click Continue.
Error (Ping)
If the system is unreachable for any reason, host down, ICMP not running on host, route not configured,
intermediate router down, network down or congested, etc., the Manager displays an Error screen with
the name of the tested host. To troubleshoot the connection, try to Ping other hosts that you know are
working.
Figure 12-9 Administration | Ping | Error Screen
To return to the Administration | Ping screen, click Retry the operation.
To go to the main Manager screen, click Go to main menu.