Filter
Top Products
D9112B | Program Entry Guide | 3.0 User Interface EN | 52
Bosch Security Systems | 2/04 | 74-06145-000-D
L## Perim Delay
Perimeter Delay Arm
Default: See Program Record Sheet
Selection: Blank or E
Blank Disable this function for Authority Level (L##) specified, if this item in Command Center Function
requires a passcode (P).
E Enable this function for Authority Level specified. When the passcode is entered at the command
center, the panel checks the authority level. The panel executes the function only in areas where the
passcode is authorized.
Programming in O/C Options
Perimeter O/C
determines whether
Perimeter
Closing
reports can
be generated for a particular area.
Whether
Perimeter
Closing
reports and subsequent
Opening
reports are generated by this user or
not depends on the L## Perimeter O/C prompt in Authority Lvl Assign.