Filter
Top Products
Manual 2100-549G
Page 19 of 59
(6) 5/16" - 3/4" NON-TAPPING
(4) 5/16" - 1/2" NON-TAPPING
(16) 5/16" - 3/4" SELF TAPPING
REF.
D
REF.
A AND B
REF.
C
B
C
REF.
REF.
A
REF.
REF.
D
MIS-3014
outer sleeve.
IMPORTANT!
to not damage gasketing material.
IMPORTANT!
entire perimeter seam
IMPORTANT!
seal between unit and sleeve.
Use care when inserting screws
between inner and
Doing so may compromise water
Apply Caulk bead to
Apply liberal amount
of caulk to back of
flange before installing.
Use (4) 1-1/2" Long Screws to
Sleeve.
Attach Louver Grille to Outer
Unit Fan Shroud
to Outer Sleeve
to Unit Back
to Attach Inner Sleeve
Self Tapping Screws
to Attach Inner Sleeve
Self Tapping Screws
Use (6) 3/4" Long
Exhaust Sleeve to
Screws to Attach
Use (6) 3/4" Long
Use (12) 3/4" Long
Use (4) 1/2" Long
Screws to Attach
frame to Exhaust
Sleeve
Use (12) Field Supplied Concrete
or Wood Screws to Secure Outer
Sleeve to Structure.
Pull Inner Frame
Out Until Flush
With Grille Mounting
Angle
FIGURE 11A
UNIT MOUNTING