56 AVWorks Installer/User Guide
Figure 4.11: User Status Dialog Box
To disconnect a user session:
1. Click the Status tab in the AMP. The User Status dialog box appears.
2. Click one or more users to disconnect.
3. Click the Disconnect Session button. A message appears prompting you to
confi rm the disconnect command.
4. Click Yes to disconnect the user.
-or-
Click No to exit without completing the disconnect command.
Rebooting Your Appliance
You can reboot the AutoView 1000R/2000R through the Tools tab in the AMP.
When clicked, Reboot will broadcast a disconnect message to any active users,
then log out the current user and immediately reboot the appliance.
To reboot your appliance:
1. Click the Tools tab in the AMP. The Tools dialog box appears.
2. Click the Reboot button. A message prompting you to confi rm this reboot
appears. Click Yes to confi rm the request. The appliance will now reboot.
Managing Appliance Configuration Databases
An on-board database contains all of the settings for an appliance. This includes
network settings, AVRIQ configurations, SNMP settings and attached servers.
You may save this configuration information to a client-based file and, should