Filter
Top Products
48 AVWorks Installer/User Guide
Figure 4.4: User Access Rights Dialog Box
b. Select a server in the left column for which this user should have
access rights. Select the Add button.
c. Select a server in the right column from which to remove a user’s
access rights. Click the Remove button.
d. Repeat steps a and b until the right column represents the appropri-
ate server access for this user, and then click OK.
5. Click OK to save the settings and return to the main AMP window.
To delete a user:
1. Click the Users category in the left column in the AMP and then select the
user(s) to delete.
2. Click the Delete button on the right side of the AMP Users window. A
confi rmation window appears.
3. Click Yes to confi rm the deletion.
-or-
Click No to exit the window without deleting the user.
Viewing the AVRIQ adaptors
The AVRIQs category lets you view the AVRIQ adaptors in your system, their port
and EID numbers as well as the computer type and keyboard language. You can
also view the AVRIQ status. A green circle indicates that the AVRIQ is online. A
yellow circle means the AVRIQ is being upgraded and a red X indicates that the
AVRIQ is offline.
Enabling and configuring SNMP
SNMP (Simple Network Management Protocol) is a protocol used to communicate
management information between network management applications and
appliances. Other SNMP managers (such as Tivoli and HP OpenView) can
communicate with your appliance by accessing MIB-II (Management Information
Base) and the public portion of the enterprise MIB. MIB-II is a standard MIB that
many SNMP servers support. When you select the SNMP category for the first
time, the AMP will retrieve the SNMP parameters from the unit.