Filter
Top Products
8 AVWorks Installer/User Guide
To install on Microsoft Windows NT, 2000 or XP:
1. Insert the AVWorks CD-ROM into your CD-ROM drive. If AutoPlay is
supported and enabled, the setup program will start automatically.
-or-
If your system does not support AutoPlay, set the default drive to your
CD-ROM drive letter and execute the following command to start the
install program (replace drive with your CD-ROM drive letter):
drive:\WIN32\SETUP.EXE
2. Follow the on-screen instructions.
To install on Red Hat Linux:
1. Insert the AVWorks CD-ROM into your CD-ROM drive. If AutoPlay is
supported and enabled, the setup program will start automatically.
-or-
If your system does not support AutoPlay:
a. Mount the CD-ROM volume by executing the following command:
mount –t iso9660 –ro mode=0555 <unit> <mount point>
Replace
<unit> with the name of the CD-ROM on your machine
and
<mount point> with the name of the desired mount point. For
example, to mount a CD-ROM which is the second IDE unit on
/mnt, execute the command:
mount –t iso9660 –ro mode=0555 /dev/hdb /mnt
b. Execute the following command to change the working directory to
the mount point:
cd /mnt
c. Execute the following command to start the install program:
sh./linux/setup.bin
2. Follow the on-screen instructions.