A SERVICE OF

logo

Open as PDF
next previous
2-737
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set system countrycode
set system countrycode
To specify the country where the system is physically located, use the set system countrycode
command.
set system countrycode code
Syntax Description
Defaults The default is US (United States).
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The country code is a two-letter country code taken from ISO-3166 (for example, VA=Holy See [Vatican
City State], VU=Vanuatu, and TF=French Southern Territories).
Examples This example shows how to set the system country code:
Console> (enable) set system countrycode US
Country code is set to US.
Console> (enable)
code Country code; see the “Usage Guidelines” section for format information.