A SERVICE OF

logo

2-497
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set port gvrp
This example shows what happens if you try to enable GVRP on a specific port when GVRP has not first
been enabled using the set gvrp command:
Console> (enable) set port gvrp 5/1 enable
GVRP enabled on port(s) 5/1.
GVRP feature is currently disabled on the switch.
Console> (enable)
Related Commands clear gvrp statistics
set gvrp
show gvrp configuration