A SERVICE OF

logo

2-664
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set snmp targetparams
Examples This example shows how to set target parameters in the snmpTargetParamsTable:
Console> (enable) set snmp targetparams bar user joe security-model v3 message-processing
v3 authentication
SNMP target params was set to bar v3 authentication, message-processing v3, user joe
nonvolatile.
Console> (enable)
Related Commands clear snmp targetparams
show snmp targetparams