2-53
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear lacp-channel statistics
clear lacp-channel statistics
To clear Link Aggregation Control Protocol (LACP) statistical information, use the clear lacp-channel
statistics command.
clear lacp-channel statistics
Syntax Description This command has no keywords or arguments.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines For differences between PAgP and LACP, refer to the “Guidelines for Port Configuration” section of the
“Configuring EtherChannel” chapter of the Catalyst 6500 Series Switch Software Configuration Guide.
Examples This example shows how to clear LACP statistical information:
Console> (enable) clear lacp-channel statistics
LACP channel counters are cleared.
Console> (enable)
Related Commands set channelprotocol
set lacp-channel system-priority
set port lacp-channel
set spantree channelcost
set spantree channelvlancost
show lacp-channel
show port lacp-channel
