2-11
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear autoshut
clear autoshut
To clear the runtime counters or reset the automatic module shutdown settings to the default settings, use
the clear autoshut command.
clear autoshut {{counters mod} | frequency | period}
Syntax Description
Defaults The defaults are as follows:
• frequency is three times.
• period is two minutes.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines You can shut down a module manually using the set module disable or the set module power down
commands.
This command is supported on Ethernet modules only.
Examples This example shows how to clear the runtime counters on a specific module:
Console> (enable) clear autoshut counters 3
Automatic shutdown counters cleared for module 3
Console> (enable)
This example shows how to reset the autoshut frequency to the default setting:
Console> (enable) clear autoshut frequency
Console> (enable)
This example shows how to reset the autoshut period to the default setting:
Console> (enable) clear autoshut period
Console> (enable)
Related Commands set autoshut
set module autoshut
show autoshut
counters mod Clears the runtime counters for the specified module.
frequency Resets the autoshut frequency to the default setting.
period Resets the autoshut period to the default setting.
