A SERVICE OF

logo

Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
disconnect
2-204
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
22
disconnect
To close a session by session ID number, use the disconnect command.
disconnect session_id
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines To identify session ID numbers, enter the show users command.
Examples This example shows how to close a session by entering the session ID number:
Console> (enable) disconnect 2
Telnet session from cbin3-view2.cisco.com disconnected.
Console> (enable)
Related Commands show users
telnet
session_id Number of the session.