A SERVICE OF

logo

Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
cd
2-5
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
22
cd
To set the default Flash device for the system, use the cd command.
cd [[m/]device:]
Syntax Description
Defaults The default Flash device is bootflash.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines A colon (:) is required after the specified device.
With commands where the device is an option, if the default device is not specified, the device set by the
cd command is used.
Examples This example shows how to set the system default Flash device to bootflash:
Console> cd bootflash:
Default flash device set to bootflash.
Console>
Related Commands pwd
m/ (Optional) Module number of the supervisor engine containing the Flash device.
device: (Optional) Valid devices include bootflash and slot0.