A SERVICE OF

logo

Open as PDF
next previous
2-110
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear qos cos-cos-map
clear qos cos-cos-map
To return the CoS-to-CoS map to the default setting, use the clear qos cos-cos-map command.
clear qos cos-cos-map
Syntax Description This command has no arguments or keywords.
Defaults The default CoS-to-CoS configuration is listed in Table 2-2.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The CoS-to-CoS map is also restored to the default configuration when you enter the clear config command
or the clear qos config command.
Examples This example shows how to clear the CoS-to-CoS map:
Console> (enable) clear qos cos-cos-map
QoS cos-cos-map setting restored to default.
Console> (enable)
Related Commands set qos cos-cos-map
show qos maps
Table 2-2 CoS-to-CoS Mapping
CoS 01234567
CoS 01234567