2-1337
Catalyst 6500 Series Switch Command Reference—Release 8.4
OL-6244-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
verify
verify
To confirm the checksum of a file on a Flash device, use the verify command.
verify [[m/]device:] filename
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines A colon (:) is required after the specified device.
Examples This example shows how to use the verify command:
Console> verify cat6k_r47_1.cbi
..........................................................
File cat6k_r47_1.cbi verified OK.
m/ (Optional) Module number of the supervisor engine containing the Flash device.
device: (Optional) Device where the Flash resides.
filename Name of the configuration file.
