Filter
Top Products
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Required
Safety glasses
Flat tip screwdriver
1/4”, 3/8”, 7/16”, 1/2” &
9/16” Wrenches
7/16”, 1/2” & 9/16”
Socket
Phillips head screw-
driver
Ratchet wrench
Power drill
Sawhorse
Gloves
3/8”, 7/16” Socket driver
Hammer
Vice grips
Step ladder
Tape measureLevel Vice clamps
Pencil
9/32”, 1/2”, 3/16” & 1/8” Drill
bits
Approved winding bars
1/4” Torx bit
5/16” x 2” Tamper-resistant hex head lag
screws (as required)
(2) 1/4”- 20 Hex
nuts
1/4”- 20 Flange hex nuts
(as required)
(2) 3/8”- 16
Hex nuts
(2) 1/4” x 2- 1/2” Carriage bolts
Package Contents Continued...
(2) 1/4” x 2-3/4” Carriage bolts
5/16”- 18 Hex nuts
(as required)
1/4”- 20 x 9/16” Track Bolts
(as required)
5/16” x 1 5/8” Hex head lag screws
(as required)
5/16” x 1 5/8” Tamper resistant lag screw
(as required)
(2) 3/8” - 16 x 3/4”
Truss head bolts
1/4” - 14 x 7/8” Self drilling
screws (as required)
(2) 1/4”- 20 X 5/8” Tamper
resistant screws
(2) 3/8”- 16 x 1-1/2” Hex head
bolts