Wayne-Dalton 8200 Garage Door Opener User Manual


 
3
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Left and right cable
drums (as required)
(1) Center bracket
Right and left
counterbalance cables
Right and left torsion
springs (as required)
Left and right end
bearing brackets
Package Contents
(1) Torsion tube
Door sections (as required)
Long and short shaft rollers
(As required)
Weather seal & nails
(if included)
U-bar’s
(as required)
#6 Screw eye and
pull rope
(if included)
(2) Horizontal tracks RH/LH
NOTE: DEPENDING ON THE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED IF NOT
NECESSARY. REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITH YOUR DOOR.
Top bracket assembly
(as required)
Left and right bottom
brackets
#1, #2, #3, #4, #5,
#6 & #7 hinges
(as required)
1
(2) Lift handles &
spacers
Extension brackets
(as required)
(2) Step plates
(2) Roller Spacers
(2) RH/LH Vertical track
assemblies
(2) Cotter pin
(2) Flat Washer(2) Clevis pin
(1) Windload label
Pushnuts
(as required)
Top bracket assemblies
(as required)