Filter
Top Products
11
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
Tools Needed:
INSTALLATION
Power Drill
7/16” Socket Driver
Sawhorses
Lock/Intermediate Section U-Bar
NOTE: For door section identification see page 5.
Place the lock, intermediate I, intermediate II,
intermediate III, intermediate IV and intermediate V
sections face down on a couple of sawhorses or flat
clean/ smooth surface. Butt the top and intermediate
sections together in the proper stack sequence and
flip up the hinges.
Refer to the u-bar schedule to determine the required
number of u-bar(s), and placement on top section.
Position the u-bars according to the u-bar schedule,
and flush against the upper or lower hinge leafs.
Center the u-bars side to side on the section, and
secure using (2) 1/4” -14 x 7/8” self drilling screws
at each end stile and center stile location.
5
End U-bar placement for lock and intermediate sections
U-bar
Upper
hinge
leaf
U-bar
(2) 1/4”- 14 x 7/8”
Self drilling screws
Center U-bar placement for lock and intermediate sections
U-bar
(2) 1/4”- 14 x 7/8”
Self drilling screws
Attaching to
center stile
U-bar
U-Bar Schedule
Door height Section
Position
on
section
Windload Options Code
1100 / 1101 1102 1103
1104 / 1120 /
1121
1122 / 1123 /
1124 / 1141
1125 / 1142 1140 1143 / 1144
8’ 3” to 8’ 9”
Lock
Bottom (1) Req. NA NA NA NA (1) Req. (1) Req. NA
Top NA NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req.
Intermediate I
Bottom NA (1) Req. NA NA (1) Req. (1) Req. (1) Req. NA
Top (1) Req. NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req.
Intermediate II
Bottom NA NA NA (1) Req. NA (1) Req. NA (1) Req.
Top (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req.
9’ 0” to 10’ 6”
Lock
Bottom (1) Req. NA NA NA NA (1) Req. (1) Req. NA
Top NA NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate I
Bottom NA (1) Req. NA NA (1) Req. (1) Req. (1) Req. NA
Top (1) Req. NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate II
Bottom NA NA NA NA NA (1) Req. NA NA
Top NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate III
Bottom (1) Req. NA NA (1) Req. (1) Req. (1) Req. (1) Req. NA
Top NA NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
(10’ 9” to 12’ 3”) and (12’
6” to 14’ 0”)
Lock
Bottom (1) Req. NA NA NA NA (1) Req. (1) Req. NA
Top NA NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate I
Bottom NA (1) Req. NA NA (1) Req. (1) Req. (1) Req. NA
Top (1) Req. NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate II
Bottom NA NA NA NA NA (1) Req. NA NA
Top NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate III
Bottom (1) Req. NA NA (1) Req. (1) Req. (1) Req. (1) Req. NA
Top NA NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Intermediate IV
Bottom NA (1) Req. NA NA NA (1) Req. (1) Req. NA
Top (1) Req. NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
12’ 6” to 14’ 0” Intermediate V
Bottom NA NA NA NA (1) Req. (1) Req. (1) Req. NA
Top NA (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. (1) Req. NA
Upper hinge leaf
Lower hinge leaf