Filter
Top Products
FIN-PRC004-EN74
Features and
Benefits
The Trane hydronic security wall fin
enclosures have been designed for
natural convection in slope top (Type S)
and flat top (Type F) configurations in 12”
(305 mm) and 18” (457 mm) heights with
a depth of 5
5
/16” (135 mm), primarily for
use in maximum security applications
such as prisons and mental institutions.
Security wall fin is also recommended
for use in schools, dormitories, nursing
homes, athletic facilities, day care
centers, detention homes, psychiatric
centers, public type buildings and other
heavy abuse areas.
Wrap-Around Design
Each enclosure’s top/front/bottom panel
is of one-piece full wrap-around design
for complete engagement with the wall
to help prevent access to the inside of the
unit. All enclosure panels are
manufactured with
1
/8” (3 mm) diameter
holes on
3
/16” (5 mm) staggered centers
for a partial perforated (inlet and outlet)
panel with internal interlocking slip joints.
Optional fully-perforated enclosures of
the entire panel are available with an
intermediate overlapping wall sleeve
with pre- punched fastener holes for
panel-to- panel alignment and fastening.
Simple installation, made of 14-gauge
(1.9 mm thickness) steel, and durability
are made possible by a continuous
partial back plate/mounting strip. A full
back plate/mounting strip manufactured
from 14-gauge (1.9 mm thickness) steel
is optional.
Durable Construction
A variety of heating elements is available
along with a complete line of
accessories. Manufactured from 14-
gauge (1.9 mm thickness) steel for
strength, these accessories allow for
wall-to-wall installation that is
architecturally compatible with most
interior designs.
Heating elements or return and supply
piping are secured to the wall with wall
type element brackets manufactured of
14-gauge (1.9 mm thickness) galvaneal
Steel with channel-formed edges for
rigidity. Each wall bracket is furnished
with galvanized element cradles and
nylon inserts with snap-in rust-resistant
nickel-chromium plated ball bearings for
silent glide operation of the heating
element.
Rigid front panels are constructed of 14-
gauge (1.9 mm thickness) or 12- gauge
(2.7 mm thickness) steel.
Vandal-Resistant
The security enclosure offers vandal-
resistant construction.
Tamper resistant helps prevent vandals
from concealing undesirable or
hazardous items within the enclosure.
Clean, Even Heat
Only the air within the room is
recirculated, so walls and furnishings
stay cleaner.
A baked-on commercial primer paint is
standard.
Attractive
Available with six optional baked-on
enamel color finishes chosen from
Trane’s Color Selection Chart UNT-S-10.
Security Wall Fin