Filter
Top Products
FIN-PRC004-EN54
Options
Type T — Top Outlet Wall Fin Enclosure
Shown
Dirt Guard Gasket
Fastens to back of the mounting
strip to prevent wall streaking.
Enclosure Extensions
Enclosure extensions are designed to
provide additional length to standard
enclosures on wall-to-wall installations or
when additional length is required to fully
cover elements and piping.
Special Purpose Accessories
These accessories can be used with Type
S, F, T and TA enclosures.
Sill extensions are used to extend the top
of the cabinet back to the wall or window
sill. They can add up to 14 inches (356
mm) of continuous surface to the top of
the unit.
The sill extension is a separate angle
piece and is to be installed at the same
time as the mounting strip. The front 90-
degree edge of the sill extension should
be butted up to the back side of the
mounting strip.
Dimensions shown in ( ) are in millimeters.
1” (25)
1
3
/4” (44)
1
3
/4” (44)
2” (51 mm)
2” (51 mm)
Sill Extension
1
/2” (13) To 14” (356)
2’ (.61 m) To 8’ (2.4 m)
2” (51)
End Panel
Enclosure
Inside Corner
Outside Corner
5”
(127)