Filter
Top Products
FIN-PRC004-EN46
Dimensional
Data
Bottom Air
Inlet Grille
Type T — 4” Deep x 14” High Top Outlet Enclosure
with Bottom Inlet Grille shown.
1. Heating Element with 3
1
/4” x 3
1
/4” size fins.
2. Front Panel with stamped sheet metal Bottom Air
Inlet Grille.
3. Mounting Strip.
4. Mounting Strip Support Washer.
5. Type 4X Wall Bracket.
6. Element Cradle.
7. Mounting Fasteners by others.
Type T — 6” Deep x 16” High Top Outlet Enclosure
with Bottom Inlet Grille shown.
1. Heating Element with 3
1
/4” x 5
1
/4” size fins.
2. Front Panel with stamped sheet metal Bottom Air
Inlet Grille.
3. Mounting Strip.
4. Mounting Strip Support Washer.
5. Type 5X Wall Bracket.
6. Element Cradle.
7. Mounting Fasteners by others.
Note: For capacity ratings, see pages 16-35 and Tables PD-4--PD-23, use correction factor of 0.90.