Filter
Top Products
Installation
CAH-SVX01A-EN 23
• Join outdoor roof panels
together at the seams in the
direction perpendicular to
airflow and secure them in place
with 5/16-inch x 3/4-inch bolts
and 5/16 lock nuts. Install the roof
joint strip to cover the seam
between two outdoor roof panels
in the perpendicular to airflow
direction of. Use 3/8-inch butyl
tape to cover the seam between
Figure 18. Trim roof joint strip
two outdoor roof panels overhang at
the side the unit. Bend joint strip
over roof panel and use two number
10 sheet metal screws (one in each
roof panel) to secure joint strip. Trim
the roof joint strip to insure that it
does not protrude more than
1/16-inch beyond outdoor roof
overhang (see Figure 18).