Filter
Top Products
– 91 –
No.
Part name
Front panel
Procedures
4) Press "PUSH" part under the front panel
and remove hooks of the front panel from
the installation plate.
Remarks
Press
Front panel
Installation plate
5) Remove the front panel fixing screws.
(4 pcs.)
6) Take off four hooks of panel from rear
side.
<How to assemble the front panel>
1) Press three center positions and two lower center positions of the air outlet, and
then hang the hanging hooks (4 pcs.) at the top side of the front panel to the rear
plate.
2) Tighten four screws.
• Incomplete hanging or incomplete pressing may cause a dewdrops or generation
of a fluttering sound.
2 Screws
Three hooks
4 Screw
Four hooks
FILE NO. SVM-10020