Filter
Top Products
– 48 –
4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press MODE : Select Dry .
2. Press MODE : Set the desired temperature.
5. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating
Press HI-POWER : Start and stop the operation.
operation (except in DRY and FAN ONLY mode)
6. ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press ECO : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1.8°F (1°C)/
hour for 2 hours (maximum 3.6°F (2°C) increase). For heating operation the
set temperature will decrease.
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
• Pressing the RESET button, the unit can start or stop
without using the remote control.
• Operation mode is set on AUTOMATIC
operation, preset temperature is 75°F (24°C)
and fan operation is automatic speed.
8. TIMER OPERATION
Setting the ON Timer Setting the OFF Timer
Press
ON
: Set the desired ON timer.
Press
OFF
: Set the desired OFF timer.
Press
SET
: Set the timer. Press
SET
: Set the timer.
Press
CLR
: Cancel the timer. Press
CLR
Press
ON
: Set the ON timer.
Press
SET
.
Press
OFF
: Set the OFF timer.
Press
SET
button during the ( or )
mark flashing.
1
1
2
3
2
3
3
4
Everyday timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Everyday Timer
· During the every day timer is activation, both arrows are indicated.
( or )
Note:
· Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
· The setting will be saved for the next same operation.
FILE NO. SVM-10020