Filter
Top Products
1 Operation
The controller is ready for use with the temperatures and operating schedules preset by the
manufacturer.
On start-up, the current time and date need to be set at the controller (–> section 1.5).
1.1 Operating elements
The operating controls are located in the front panel of the controller and protected by a Plexi
-
glas door.
1.1.1 Operating keys
Changeover key (–> Fig. 11 on page 112)
– Press to switch between operating level and configuration level and from
configuration level to the parameter level
Reset key
Press to reset accessible parameters to their default settings; the controller
must be in the parameter level
Arrow keys (–> Fig. 11 on page 112)
– To scroll within levels
– To change values
– To switch from the parameter level into the configuration level
(press both arrow keys simultaneously)
Enter key
– To access levels
– Access parameters and functions to edit them
– Confirm settings
– Display set points in the info level
6 EB 5476 EN
Operation