Filter
Top Products
1.6.1 Entering public holidays
On public holidays, the times-of-use specified for Sunday apply. A maximum of 20 public holi
-
days may be entered.
The public holidays are set in the parameter level.
Set the function block FB6 = ON to make the programmed public holidays also apply to the
DHW heating.
Parameter
WE Range of value
Public holidays – Configurable as required
Proceed as follows: Switch to the parameter level.
Display: Time, blinks
Select datapoint for public holidays.
Display:
Open data point for public holidays.
If applicable, select
– – – –
.
Activate editing mode for public holiday.
blinks.
Edit public holiday.
Confirm public holiday.
To enter additionalpublic holidays, re-select
––––
(between 31.12 and01.01) and repeat the
steps in the fields highlighted in gray.
Return to the operating level.
Note!
Public holidays that are not assigned to a specific date should be deleted by the end of the year
so that they are not carried on into the following year.
Deleting a public holiday:
Select the holiday you wish to delete in the datapoint for public holidays.
Confirm selection.
Select
– – – –
.
Delete the public holiday.
14 EB 5476 EN
Operation
0 1 2 3 4 5 6 7 8 9 1011121314 15161718192021222324