Filter
Top Products
1.6 Setting the times-of-use
Two times-of-use can be set for each day of the week. If only one time-of-use is required, the
start and stop times of the second time-of-use must be programmed to identical times.
The times schedules are set for the required control circuits one after the other in the parameter
level.
Time schedule Display
Heating circuit 1
Heating circuit 2 (Anl 9: underfloor heating circuit)
(second set of parameters after datapoint for vacation mode)
DHW circuit
Circulation pump
Parameters of the heating circuit
WE Range of values
Period/day 1–7 1–7, 1–5, 5–6, 1, 2, 3, 4, 5, 6, 7 with
1–7 = daily, 1–5 = Monday to Friday
6–7 = Saturday to Sunday
1 = Monday, 2 = Tuesday, …, 7 = Sunday
Start first time-of-use 7:00 00:00 to 24:00h; in steps of 30 minutes
Stop first time-of-use 12:00 00:00 to 24:00h; in steps of 30 minutes
Start second time-of-use 12:00 00:00 to 24:00h; in steps of 30 minutes
Stop second time-of-use 22:00 00:00 to 24:00h; in steps of 30 minutes
Proceed as follows:
Switch to the parameter level.
Display: Time, blinks
12 EB 5476 EN
Operation
0 1 2 3 4 5 6 7 8 9 1011121314 15161718192021222324