Filter
Top Products
Quadra-Fire • QFP44 • 4051-300 Rev M • 09/08 53
14
14
Appliance Setup
C. Install the Refractory
• Remove the refractory retainer from each side of the
rebox.
• Put the left side refractory in place and reinstall the left
side refractory retainer.
Glass
Latches
Figure 14.1 Glass Assembly Removal
Refractory Retainer
Figure 14.2 Install Left Side Refractory
A. Remove Glass Assembly
WARNING! Risk of Asphyxiation! Handle ¿ xed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
• DO NOT strike, slam or scratch glass.
• DO NOT operate ¿ replace with glass removed, cracked,
broken or scratched.
• Replace as a complete assembly.
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the rebox or underneath in the control cavity.
WARNING! Risk of Fire and Electric Shock!
Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
The glass assembly can be removed from the unit by
pulling and releasing the glass latches. There are three
across the top, three across the bottom, and one in the
center of each side.
The glass assembly is heavy. Use caution when remov-
ing.
• Install the lower back refractory.
Figure 14.3 Install Lower Back Refractory