Filter
Top Products
Quadra-Fire • QFP44 • 4051-300 Rev M • 09/08 3
Safety Alert Key:
• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.
• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.
• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Used to address practices not related to personal injury.
Table of Contents
A. Congratulations 2
B. Limited Lifetime Warranty 5
1 Listing and Code Approvals
A. Appliance Certi cation 7
B. Ceramic Glass Speci cations 7
C. BTU Speci cations 7
D. High Altitude Installations 7
E. Non-Combustible Materials Speci cation 7
F. Combustible Materials Speci cation 7
G. Electrical Codes 7
H. Requirements for
the Commonwealth of Massachusetts 8
User Guide
2 Operating Instructions
A. Gas Fireplace Safety 9
B. Your Fireplace 9
C. Clear Space 10
D. Decorative Doors and Fronts 10
E. Fixed Glass Assembly 10
F. Dashboard Control 10
G. Remote Operation 11
H. Before Lighting Fireplace 16
J. Lighting Instructions (IPI) 17
K. After Fireplace is Lit 18
L. Frequently Asked Questions 18
3 Maintenance and Service
A. Maintenance Tasks-Homeowner 19
B. Maintenance Tasks-Quali ed Service Technician 20
Installer Guide
4 Getting Started
A. Typical Appliance System 22
B. Design and Installation Considerations 23
C. Tools and Supplies Needed 23
D. Inspect Appliance and Components 23
5 Framing and Clearances
A. Select Appliance Location 24
B. Construct the Appliance Chase 25
C. Clearances 25
D. Mantel and Wall Projections 26
6 Termination Locations
A. Vent Termination Minimum Clearances 27
7 Vent Information and Diagrams
A. Approved Pipe 29
B. Vent Table Key 29
C. Use of Elbows 29
D. Measuring Standards 29
E. Vent Diagrams 30
8 Vent Clearances and Framing
A. Pipe Clearances to Combustibles 34
B. Wall Penetration Framing 34
C. Install the Ceiling Firestop 35
D. Install Attic Insulation Shield 36
9 Appliance Preparation
A. Secure and Level the Appliance 37
10 Install Vent Pipe
A. Assemble Vent Sections 38
B. Assemble Slip Sections 39
C. Secure the Vent Sections 40
D. Disassemble Vent Sections 40
E. Install Metal Roof Flashing 41
F. Assemble and Install Storm Collar 42
G. Install RF4-8 43
H. Install Vertical Termination Cap 44
I. Heat Shield Requirements for
Horizontal Termination 44
J. Install Horizontal Termination Cap 45
11 Gas Information
A. Fuel Conversion 46
B. Gas Pressure 48
C. Gas Connection 48
D. High Altitude Installations 48
12 Electrical Information
A. Wiring Requirements 49
B. Standing Pilot Ignition System Wiring 49
C. Optional Accessories Requirements 49
D. Electrical Service and Repair 50
E. Junction Box Installation 51
13 Finishing
A. Mantel and Wall Projections 52
B. Facing Material 53
C. Facing Template Removal 53
D. Mantel 53