Filter
Top Products
6
Controls
2 GB
max.
Fig. 2 - 01
1
2.02 Control panel
Fig. 2 - 02
1
2
The current operating conditions are displayed on control panel 1. Operation takes place in a
constant dialogue between the control unit and the operator. For this purpose, depending on
the operating condition of the machine, different symbols and/or texts are displayed. If the
symbols or texts are framed, these show functions which can be selected by pressing the
appropriate position on the monitor. By pressing the corresponding function this is carried
out or switched on or off immediately, or a further menu appears, e.g. for entering a value.
2 Controls
2
.01 Knee Switch
Manual sewing:
By operating knee switch ● 1 it is possi-
ble to alternate between two pre-set
amounts of fullness.
Programmed sewing:
By operating knee switch ● 1 the amounts
of fullness are changed according to the
program selected.