Filter
Top Products
Input
30
If necessary, insert the seam section. ●
The current seam section is copied and all following seam sections are set one place
back.
If necessary, delete the current seam section. ●
If necessary, conclude the input of the current seam and store the parameter for the ●
other seam in the reverse order (mirror seam).
Set the seam end or program end. ●
If entering only one seam (only the right or only the left seam) the program end is set in
the desired seam section.
In the same way as the program end, the seam end is set when entering the right and
left seam. The seam end is set in the fi rst seam and the program end in the second
seam.
Conclude the input of the fi rst seam section and change to the next seam section. ●
Conclude the input and change to the input of the basic settings. ●
Conclude the input and change to programmed sewing. ●