Filter
Top Products
Input
27
6.01 Seam program input
Seam programs can be created by entering parameters in the "Creating/adjusting a seam
program" function, or by sewing a sample with the "Teach in" function.
Irrespective of which function is being used, fi rst of all it is necessary to select the program
number and the basic settings of the seam program, which is to be sewn.
6.01.01 Basic settings for seam program input
The basic settings in the "creating/adjusting a program" and the "teach-in" functions are the
same.
Switch on the machine. ●
Call up the input mode. ●
Call up the "Creating/adjusting a seam program" or the "Teach in" function. ●
If necessary, change the selected program number and confi rm the selection. ●
If applicable, enter or change a comment. ●