Filter
Top Products
Input
41
6.03 Seam program administration
In the program administration the seam programs deposited in the machine memory and
the SD-Card can be deleted and copied. The left side of the display shows the programs in
machine memory. The right side of the display shows the programs on the SD-Card. Selec-
ted programs are red marked. With the MDAT-function the machine confi guration can be co-
pied or deleted. The Format-function formats the SD-Card. Further actions are shown in a
dialog window.
After SD-Card insertion it takes up to 20s until the card is detected.
Switch on the machine. ●
Call up the input mode. ●
Call up program administration. ●
Read SD-Card and machine memory again. ●
Explanation of the functions
Input mode
Calls up the basic display for the input mode.
Sewing mode
Quit input mode and call up sewing mode.
Program selection
After the program administration has been selected, at least one seam program is always
marked. Using the arrow functions, the desired seam program can be selected. With the
*-function and the arrow functions a seam program block can be marked. By pressing the
*.function again, the block function is deactivated.
Copy
Selected seam programs are copied from/to SD-Card.
Delete
Selected seam programs are deleted.