Filter
Top Products
Sewing
25
5.04 Error messages
If an error occurs, the text "ERROR" appears on the display, together with an error code. An
error message is caused by incorrect settings, defective elements or seam programs and by
overload conditions.
For an explanation of the error codes see Chapter 7.05 Explanation of the error messages.
5.03.01 Program interruption
With the "program interruption" function the programmed seam sequence is interrupted ●
(e.g. if the thread breaks).
Interrupt program sequence. ●
If necessary, tact forwards or backwards through the sections of the seam program. ●
If necessary, change the values and carry out the other functions as in manual sewing, ●
see Chapter 10.01 Manual sewing.
If necessary, call up programmed sewing again.. ●
Eliminate the error. ●
Confi rm error elimination. ●