Filter
Top Products
Adjustment
43
7 Adjustment differing from the basic machine
7
.01 Basic setting of the differential adjustment device
Requirement
With the fullness set at "0", the stitch length at "2.5" and the adjustment gauge 5 fi tted,
the roller 2 should be touching pressure sleeve 4.
Fig. 7 - 01
Switch on the machine. ●
Press key " ● 0" on keyboard 1 (LED must light up).
Switch off the machine. ●
Adjust roller ● 2 (screw 3) according to the requirement.
1
5
4
3
2