Filter
Top Products
Input
33
6.01.04 Entering the functions at the beginning of the seam during seam programming
After the appropriate function has been called up, the menu for entering the value of the
placement stitch appears. To begin with the condensed stitches function is not activated.
PFAFF 487, 489 PFAFF 5487
PFAFF 487 ● , 489
Switch on the single start backtack function and call up the menu for entering the values.
(1 – 9 stitches can be entered).
or
Switch on the double start backtack function and call up the menu for entering the values. ●
(1 – 9 stitches can be entered).
PFAFF 5487 ●
Switch on the condensed stitches function and call up the menu for entering the values.
(1 – 30 stitches can be entered).
In each case change the number of stitches for the condensed stitches or the number of ●
backtack stitches with the appropriate arrow keys.
Change the value for the maximum speed during the condensed stitches or backtacking ●
operation (100 – 1500 spm can be entered).
Choose whether the condensed stitches or the backtacking operation at the beginning of ●
the seam should be carried out at a fi xed speed (normal symbol) or at a pedal-controlled
speed (inverse symbol).
If necessary, sew the seam section in reverse (with activated function). ●
Conclude the input. ●