Filter
Top Products
Intelli-M Hardware Installation And Reference Guide
39
Appendix B: Demo Kit Wiring
The following data provides the default configuration parameters if wiring the S-EIDC-U for a
demo kit.
Important: An alarm is defined within Intelli-M as an event (i.e., alert) that is sent to the software
monitoring the S-EIDC-U. This is not a “burglar alarm” nor has it has not been verified by UL.
S-EIDC-U Demo Kit Wiring
Defaults:
• Inputs: Demo Kit Inputs (Push buttons or Toggles) should be wired as Normally Open
• Outputs: Initial Status = De-Energized
Input Configuration:
• Input 1: Door Contact (NO)
• Input 2: REX (NO)
• Input 3: REX Free Egress (NO)
Output Configuration:
• Output 1: Door Strike (DE)
• Output 2: Alarm LED (DE)
• Output 3 Door Status LED (DE)
• Output 4 Buzzer (DE)