Filter
Top Products
36
4.5.1 HTTPget using Port 1000 (continued)
httpget -r -S “*SRTC\r” 192.168.1.200:2000
where:
-r –S are parameters needed for the command string
*SRTC is the command as the following:
*SRTC Read the temperature in C (Channel 1)
*SRTF Read the temperature in F (Channel 1)
*SRHC Read temperature in C (Channel 2)
*SRHF Read temperature in F (Channel 2)
*SRDC Read the differential in C
*SRDF Read the differential in F
*SRA1 Read temperature setpoints (Channel 1)
*SRA2 Read temperature setpoints (Channel 2)
*SRB Read the temperature in C, (both Channel 1 and Channel 2)
*SRYS Indicate AC or DC power and battery status
*SRYRST Reset Power on iSE
*SR_XD1 Exclude alarm 1 (disable alarm 1 function)
*SR_XD2 Exclude alarm 2 (disable alarm 2 function)
*SR_XC1 Reset relay 1 latch condition
*SR_XC2 Reset relay 2 latch condition
*SR_XE1 Include alarm 1 (enable alarm 1 function)
*SR_XE2 Include alarm 2 (enable alarm 2 function)
*SR_XP1 Close relay 1 for < 200 mSec
*SR_XP2 Close relay 2 for < 200 mSec
*SR_XH1 Close relay 1
*SR_XH2 Close relay 2
*SR_XL1 Open relay 1
*SR_XL2 Open relay 2
*SRT2 Status of Contact 1 (Disable, Normal, Active)
*SRH2 Status of Contact 2 (Disable, Normal, Active)
*SRD2 Status of the Output associated with the Contacts (Active High,
Active Low)
\r is the carriage return termination character
192.168.1.200 is an IP address
2000 is a socket port number
Response:
076.6 (in Deg.F 35)