Filter
Top Products
35
4.5.1 HTTPget using Port 1000
You can setup and read the information from the iSE by using the HTTPget program.
The following program can be used to read data from the embedded server firmware by
using TCP port 1000. The command string is sent to this TCP port, then the response
can be read back from the same socket.
The HTTPget.exe file is used to setup and read information from the iSE. This file will be
automatically installed when you install the MailNotifier software available on our website
and CD.
Notes on using HTTPget :
The HTTPget.exe program is installed to the windows directory (usually c:\winnt or
c:\windows) when installing the Mail Notifier software.
1. Open up a command window (or have a DOS window)
a) Click on start menu
b) Click on "Run"
c) In the dialog box that appears, type "cmd" or "command" and click on "OK"
button.
d) A command window should now appear.
2. If you now type "HTTPget" and press the "enter" key, the program options should be
displayed.
3. Next run HTTPget with the options displayed as shown in the following text