Filter
Top Products
Installation (for qualified installers only) 9
© Travis Industries 4070201 100-01182_002
Top Vent or Rear Vent Configuration
This appliance is shipped in the rear vent configuration. To change to the top vent configuration,
follow the directions below.
NOTE: the vent configuration affects several aspects of installation (framing, maximum vent rise,
maximum vent run). When reviewing the installation requirements make sure to pay attention to the
type of configuration being used.
Converting the
Fireplace to Top Vent
Configuration
Remove and discard all of
the insulation found near
the flue assembly (make
sure to remove every
piece).
Remove the 4 screws
securing the intake cover
plate. Remove it and place it
aside.
Remove the 4 screws
securing the cover plate.
Remove it and place it
aside.
Remove the 4 screws
securing the cover plate (with
hole).
This part may be discarded.
Top of Fireplace
Back of Fireplace