Filter
Top Products
58 Optional Equipment (for qualified installers only)
Travis Industries 4070201 100-01182_002
Installation Overview
The optional heat duct allows the fireplace to transfer heat to separate locations in the home.
Installation should take place prior to installing drywall.
Warning: This kit must be installed as specified in these instructions. Do not modify any
component.
Warning: Use of any external blower other than the Travis Power Heat Duct Blower will void the
warranty and listing of this appliance and may create a fire hazard.
Note: The power heat duct must be installed by a qualified service technician.
Note: Some building codes may require the use of firestop spacers whenever the duct passes
from room to room.
Note: When routing ducts through a cold area (e.g. crawl space) we recommend insulating
the duct with fiberglass insulation. If paper-backed insulation is used, the paper can
not contact the duct.
Note: One or two het duct kits may be used.
Starter Ring
Use 10” x 3-1/4”
wall stack (duct)
when passing
through tight
areas.
6" Duct
Duct Adapter
(6” Round to 10” x 3-1/4”)
Floor
Boot
Grill
Rheostat
(with cover plate)
Junction Box
Wall Adapter
(for use on
2 x 4 walls)
Blower
Box
Maximum Duct
Length = 20'
Electrical Source