Filter
Top Products
2 - 88
2 SYSTEM CONFIGURATION
(h) FR-V5NSCBL
Model name
Item
FR-V5NSCBL005
FR-V5NSCBL01 FR-V5NSCBL05 FR-V5NSCBL10 FR-V5NSCBL20
Cable length [m(ft.)] 0.5(1.64) 1(3.28) 5(16.40) 10(32.81) 20(65.62)
(4) Connection example with servo amplifiers
As the SSCNET cables or terminal connector is different depending on the servo
amplifiers, refer to the following connection example.
The SSCNET cables and terminal connector used in the connection example are
any of the models shown in the following table.
When absolute position detection control is executed, installed battery(MR-BAT/
A6BAT) to servo amplifier.
When the vector inverter (FR-V5
0- ) is connected, fix the ferrite core to the
SSCNET cable. (Refer to "SSCNET communication option FR-V5NS operating
manual" for details.)
Part name Model name Depiction in connection example
MR-HBUS M
MR-J2HBUS M
MR-J2HBUS M-A
Servo amplifier to servo amplifier
SSCNET cable
FR-V5NSCBL
Q173HB CBL M/
Q172HBCBL
M(-B)
Motion CPU to
servo amplifier
SSCNET cable
Q173J2B
CBL M/
Q172J2BCBL
M(-B)
Motion CPU to Dividing unit
SSCNET cable
Q173DVCBL
M
MR-TM
Terminal connector
MR-A-TM