Filter
Top Products
28
Managing Passwords
Managing Passwords
ATTENTION: By default, passwords are disabled on the system, which allows anyone to
access the menus and change DVR settings. It is recommended to enable passwords. See
“Enabling and Disabling Passwords” on page 29.
Refer to the tables below for the user name (ID) and password required to log in to your
system:
LEVEL ID PASSWORD
USER1 1 1111
USER2 2 2222
ADMIN 3 3333
LEVEL ID PASSWORD
USER1 7 1111
USER2 8 2222
ADMIN 9 3333
Local DVR Access:
Remote/LAN Access:
User Accounts
The DVR has three user accounts: ADMIN, USER2, and USER1. The ADMIN account is the
system administrator. The ADMIN can access all the menus and can configure the DVR
both locally and from a remote computer. The ADMIN can also see covert cameras when
he is logged in from a remote computer or mobile device. For information on covert
cameras, see “Configuring the Covert Setting (Hidden Cameras)” on page 31.
USER2
is the standard user account. USER2 can access all the menus
on the DVR except
for the Setup Menu. USER2 can view and backup recorded footage when logged into the
DVR from a remote computer or mobile device but cannot access the remote setup menu
or see covert cameras.
USER1 is a limited access user account that cannot access any menus on the DVR. USER1
can view
cameras when logged in from a remote computer or mobile device but cannot
access the setup menus, view or backup recorded video, or see covert cameras.
Using the Password Wheel
Login with your user ID and password using the
Password Wheel
The Password Wheel is used to input and change
user IDs and passwords.
To use the Password Wheel:
• Click 0~9 to
e
nter your user ID and password.
NOTE: You cannot select the options to the left of the Password Wheel (user ID, password)—
yo
u can
only
select the digits. If you make a mistake, simply right-click to exit or
click
and re-select the option to try again.