Filter
Top Products
116
Appendix F: Replacing the Hard Drive
5 Carefully slide the hard drive back until it is clear of the SATA connector and lift it out of the
DVR.
SATA connector
Replacing the Hard Drive
To replace the hard drive:
1 Place the hard drive into the DVR. Make sure to align the SATA ports on the hard drive with
the D
VR SATA connector.
DVR SATA connector
Hard drive
SATA ports
2 Slide the hard drive onto the DVR SATA connector.
3 Hold the har
d drive in place with your hand and carefully turn the DVR over. Replace the hard
drive screws (4x) on the bottom panel of the DVR.
It is EXTREMELY IMPORTANT
that you hold the hard drive in
place while turning the DVR
over and replacing the bottom
panel screws. Not holding the
hard drive can break the DVR.