Filter
Top Products
6
Getting Started
Step 2: Connect the Monitor
NOTE: Lorex monitors and touch screen monitors include all the necessary cables and
adapters to connect to your DVR. Check your monitor documentation to see which
cables and adapters are included with your monitor.
1 If you are using a touch screen monitor, connect a USB cable (not included) from the monitor
to
the USB port on the rear panel of the DVR.
2 Connect a HDMI cable (not included) from the monitor to the HDMI port
(recommended) OR;
• Connect a VGA cable (not included) from the monitor to the VGA port.
3 Power on the monitor.
NOTE: If you have a monitor with a DVI input, you must use an HDMI to DVI adapter (not
included). Y
ou cannot use a DVI to VGA adapter.
HDMI
VGA
8-channel model shown
USB
NOTE: The DVR cannot use multiple monitors at the same time.
Step 3: Connect the Mouse
• Connect a USB mouse to one of the USB ports on the front or rear panel of the DVR.
8-channel model shown
Front USB ports
Rear USB port