Filter
Top Products
5
Basic Setup
NOTE: This DVR features unique mounting options and can be mounted to back of LCD
monitors with a VESA mount. For mounting instructions, see “Appendix E: Mounting
the DVR to a VESA Mount” on page 113. If you intend to mount the DVR, it is
recommended to do so before completing setup.
Step 1: Connect the BNC Cameras
8-channel
• Connect the BNC cameras to the Video IN ports on the rear panel of the DVR.
Push and twist the BNC connector
clockwise to secure it to the BNC port.
16-channel
1 Connect the Octopus BNC connector for channels 1-8 (included) to the Video IN CH 1~8 port
on the rear panel of the DVR. Connect the Octopus BNC connector for channels 9-16
(included) to the Video IN CH9~16 port. The label at the end of each connector indicates the
channel number.
2 Connect the BNC ca
meras to the Octopus BNC connector(s).
Push and twist the BNC connector
clockwise to secure it to the
Octopus BNC connector
Connect this end to Video In port
on your DVR
NOTE: Do not connect to VGA port
Labels indicate
channel number
NOTE: For more information on installing cameras, see “Connecting Cameras” on page 9.