Kenmore 385.16231 Sewing Machine User Manual


 
Using Walking Foot (Option)
(_ Thumb screw
(_) Foot holder
® Lever
® Needle clamp
® Presser bar
This is a special attachment for hard-to-feed materials.
This foot prevents fabric slipping or puckering by feeding
fabrics with both upper and lower feed dogs The walking
foot is great for fine fabrics, knits, leather and matching
aTuidS"
rn off the switch
r2-qRaise the needle and presser foot.
[_Loosen the thumbscrew and remove the foot holder
(Refer to page 12)
[]Attach walking foot to the presser bar with the lever
above the needle clamp, and secure it with the thumb
screw..
NOTE:
Sew at low to medium speed.
Set the stitch length in the range of 0-4
f
[] ON
OFF
[]
®
[]
[]
Using 1/4"'Seam Foot (Option)
(_ Stitch selector: 7
Stitch width: 65
® Stitch length: Red zone
® Needle thread tension: 3 to 5
® Presser foot: 1/4""seam foot
NOTES:
When using the 1/4- seam foot, make sure to use the
center needle position, otherwise the needie may strike
the presser foot and possibly break.
Use a #11 blue stretch needle, which effectively prevents
skipped stitching.
Using the black bar as a guide, straight stitch fabric pieces
together. Use for keeping layers of fabric feeding evenly..
This foot is a must for sewing lightweight fabrics, matching
plaids, stripes and quilting.
44
I _ WtUTN
o ( LI i®
I
® ®
J
.-.
J