Filter
Top Products
Changing Needle
(_ Needleclampscrew
(_)Needleclamp
[_Turnoffthepowerswitch..
Raisetheneedleto itshighestpositionbyturningthe
handwheelcounterclockwise,towardyou,andlowering
thepresserfoot Loosentheneedleclampscrew(_by
turningitcounterclockwise.Removetheneedlefromthe
needleclamp_,
[] Inserta newneedleintotheneedleclamp(_withthe
flatsidetotherear.Wheninsertingtheneedleintothe
needleclamp(_, pushit upasfarasit goes.Tighten
theneedleclampscrew(_ firmlybyturningit clockwise,
[_To seeiftheneedleisgood,placetheflatsideofthe
needleontosomethingflat(needleplate,glass,etc.),
Thegapbetweentheneedleandtheflatsurfaceshould
beconsistent,.Neverusea bentor bluntneedle.
A damagedneedlecancausepermanentsnagsorruns
in knits,finesilksandsilk-likefabrics.
To Remove and Attach the Foot Holder
(_ Thumb screw
(_) Foot holder
(_ Presser bar
• To remove
Remove the thumb screw(_by turning it counterclockwise
with a screwdriver,
o To attach
Match the hole in the foot holder (_)with the threaded
hole in the presser bar (_ Fit the thumb screw(_into
the hole,. Tighten the screw(_by turning itclockwise with
a screwdriver,
Changing Presser Foot
(_) Snap-on button (red button)
(_) Groove
(_ Pin
o To remove
Raise the needle to its highest position by turning the
handwheel counterclockwise. Raise the presser foot, and
press the red button (_on the back of the foot holder,
• To attach
Place the selected presser foot, so that the pin(_) on the
foot lies just under the groove(_)on the foot holder, Lower
the presser bar to lock the foot into place.
[]
f
%,,¸¸
f
Flat side
Lade piano ....._
Meplal vers r_
[]
Needle
Aguja
Aiguilte
[]
,J
.$
12