Filter
Top Products
Cleaning the Shuttle Race and Feed Dogs
[] Unplug the machine and remove the presser foot and
needte Open the face cover to allow room to remove the
needle plate screw with a screwdriver Remove the needle
plate_) and take out the bobbin
0 Needle plate
Lift up the bobbin holder_)and remove it,
_) Bobbin holder
[] Brush out dust and lint inside the bobbin holder. Clean
the feed dogs (_ and hook race(_ with a lint brush. Wipe
out gently with a soft, dry cloth
_) Feed dogs
Hook race
[] Line up the triangle marks ® and position the bobbin
holder, so that the notch fits next to the stopper® in the
hook race,
® Line up the triangle marks
® The notch fits next to the stopper.
/
[]
Oiling the Machine
Unplug the machine. Open the face cover and oil the two
points, as shown, at least once ayear. One or two drops of
oil is sufficient Remove excess oil, otherwise it may stain the
fabric In case the machine has not been used for a long
period, oil it before sewing. Use quality sewing machine oil.
f
[]
[]
[]
®
/
/
/
J
94