Filter
Top Products
Overcasting (Zigzag stitch)
Machine setting
O Pattern
(_ LED display
® Foot A:Zigzag foot or
C:Overcasting foot
CAUTION."
Do not set the stitch width less than 5 when using
the overcasting foot to prevent the needle from
hitting the wires on the foot.
Place the raw edge of the fabric next to the guide of
the foot and start sewing.
@
10
[
®
i ml
i LIJ
®
%,%
Multiple zigzag stitch (Tricot stitch)
Machine setting
11
O Pattern
® LED display
® Foot A: Zigzag foot
This stitch is used to finish a raw edge of synthetics
and other stretch fabrics that tend to pucker. Sew
along the fabric edge leaving an enough seam
allowance.
After sewing, trim off the seam allowance closer to the
stitches as shown.
Q
11
[
®
'I]I
4".7
Overedge stitch
Machine setting
O Pattern
® LED display
® Foot C: Overcasting foot
@ @ @
12
[Isl %
CAUTION:
Do not set the stitch width less than 5 when using
the overcasting foot to prevent the needle from
hitting the wires on the foot.
This stitch overcasts and seams the raw edge at the
same time, it prevents the fabric from fraying.
4O